Skip to content
‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎‎‎‏‏‎‏‏‎‎‏‏‎‎‏G‎‏‏‎‎‏‏oing to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV‎‏‏‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎
‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days ‏‏‎ Going to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV
Warranty Shipping Contact
October 19, 2022

New Kit Saves Shop Owner 8 Hours Repairing Broken Exhaust Manifold Bolts On Dodge 3.6L Engine

New Kit Saves Shop Owner 8 Hours Repairing Broken Exhaust Manifold Bolts On Dodge 3.6L Engine

The above picture of a Dodge 3.6L exhaust manifold shows how shop owner Kevin Van Meter saved eight hours of repair time by cleanly removing broken bolts with the new kit from ProMAXX Tool.

BAD NEWS…AS SHOP OWNER KEITH VAN METER BEGAN THE JOB OF REPLACING THE CATALYTIC CONVERTER ON A DODGE PROMASTER 3.6L ENGINE, HE DISCOVERED THAT HE HAD TO DEAL WITH BROKEN EXHAUST MANIFOLD BOLTS AS WELL.
Once he realized an Easy Out Tool would not get the job done and free-hand drilling was out of the question, he contacted ProMAXX Tool to find a solution. Lucky for him the company had a ProPlate in development. Since he already owes and uses several ProMAXX Tool Kits, Van Meter knew if they had one that worked on Dodge 3.6L engines, it would save him time and make him more productive.
ProMAXX Tool’s latest innovation allows technicians to quickly make an on-the-vehicle exhaust manifold repair (EMR) for Dodge/Jeep 3.6L V6 engines from 2011 to 2020. The kit comes with all necessary equipment including premium ProDrill Gold bit tooling, a tap, bushings, and fasteners.
DON’T DRILL OFF CENTER

“I was really in a bind,” said Van Meter, an experienced mechanic who opened his own shop more than 23 years ago. “Without a guide plate, I’d either risk drilling off center or I’d have to pull the entire cylinder head.” 

That is when he spoke with ProMAXX Tool Specialist Kelly Bails. “Since we already had the tool in development, it needed a real-world field test,” she said. “I was able to quickly get Keith the prototype because my job is to always take care of the customer.”

NEW KIT SAVES SHOP EIGHT HOURS OF WORK

Once the kit arrived, Van Meter was able to use its precision-made ProPlate as a guide to easily drill out and remove all broken bolts. “If I had to pull the cylinder head it would have taken 10 to 15 hours,” he said. “But, thanks to the 3.6L EMR Kit, I got the entire job done in two. That’s a savings of more than eight hours of work!”

Van Meter credits much of the success to the precision of ProMAXX Tool’s kits and the company’s ProDrill Gold Tooling. Each bit is machined turned right here in the USA. Not only are they are engineered to handle a wide variety of material types and hardnesses, they are manufactured to tight tolerances to ensure accurate and trouble-free drilling.

PRODRILL GOLD TOOLING EXCEEDS AEROSPACE SPECIFICATIONS

ProDrill Gold Tooling easily goes through Stainless Steel and extremely hard material including Boron, Ultra-Strength, and even Titanium. “I’ve tried the others, but now I always use ProMAXX bits because they just cut better than the rest,” said Van Meter. “I have an entire section of my toolbox dedicated to just ProMAXX bits.

Because the vehicle was part of a larger fleet that Van Meter’s shop services, the cost savings made his customer very happy and demonstrated the added value his shop provides.

Working out of New Jersey, Van Meter believes that harsh climate conditions and the road salt and brine that come with them help eat away at the metal typically used in manifold bolts. “I’ve been using ProMAXX Tools to remove broken bolts for years,” he said. “Welding on nuts doesn’t always work, but drilling does. When I come across a busted bolt, I don’t even try to weld, I go right to my ProMAXX Tool kits.”

CHECK OUT EXHAUST MANIFOLD REPAIR KITS FOR CHRYSLER, DODGE, JEEP & MORE

CDJR 3.6L EMR KIT

CDJR 3.8L EMR KIT

CDJR 5.7L & 6.1L EMR

CDJR 3.7L & 4.8L EMR

Previous article See How Tommy Wheel Bearing Puller Reduces Hub Removal Times To About 25 Minutes
Next article TECH BUILDS BIG REP AND MAKES BIG MONEY LEARNING HOW TO REMOVE BROKEN EXHAUST MANIFOLD BOLTS QUICKLY & EASILY

NEW AT PROMAX

  • Ford Explorer SAFETY RECALL 22S27-SB 204-594 Forcing Screw Replacement
    204-594 Forcing Screw Replacement

    Forcing Screw Alternative to Ford 2020-2022 Explorer Recall Special Service Tool part# 204-594 "Thunderbolt"

    Part#: PMX204-594
    $0.00 - $0.00
    $0.00
    $149.95
    $149.95 - $149.95
    $149.95

    $0.00 - $0.00
    $0.00
    $149.95
    $149.95 - $149.95
    $149.95
  • SAVE: 25% SAVE: %
    Fuel Injector Seal Puller (PMXISP200A)
    Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller

    Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller and Seal Saver ProKit

    Part#: PMXISPS200BSE
    $199.95
    $29.95 - $199.95
    $199.95
    $29.95 - $149.95
    $29.95 - $149.95
    $29.95

    Fuel Injector Seal Puller/Saver ProKit Part #: PMXISPS200PRO Introducing the cutting-edge Ford Power Stroke 6.7L Fuel Injector Copper Compression S...

    VIEW MORE
    $199.95
    $29.95 - $199.95
    $199.95
    $29.95 - $149.95
    $29.95 - $149.95
    $29.95
    SAVE: 25% SAVE: %
  • Ford-6.7L-Power-Stroke-EGR-Tube-Broken-Bolt-ProKit-Plus
    Ford-6.7L-Power-Stroke-EGR-Tube-Broken-Bolt-ProKit

    Ford 6.7L Power Stroke Diesel EGR Tube Broken Bolt Repair Kit - Nino

    Part#: PMXN200PRO
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95

    Nino EGR Tube ProKit Part #: PMXN200PRO 6.7L Ford Power Stroke Diesel Exhaust Gas Recirculation EGR Repair Kit - Nino The ProMAXX® EGR (Nino™) repa...

    VIEW MORE
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95
  • Ford 6.7L Diesel Power Stroke Fuel Injector Broken Bolt Repair Kit
    Ford-67L-Power-Stroke-Fuel-Injector-Broken-Bolt-Repair-ProKit

    Ford 6.7L Diesel Power Stroke Fuel Injector Broken Bolt Repair Kit - Nico

    Part#: PMXO200PRO
    $549.95 - $699.95
    $549.95
    $549.95 - $699.95
    $549.95 - $699.95
    $549.95

    Now, Take $100 Off Nico ProKit PlusAnd…Get an Extra Insert - That’s a $179 Value! Ford 6.7L Power Stroke Diesel Hold-Down Bolt Repair ProKit Plus #...

    VIEW MORE
    $549.95 - $699.95
    $549.95
    $549.95 - $699.95
    $549.95 - $699.95
    $549.95
  • Ford 6.7L Power Stroke Fuel Injector Puller ProKit
    Ford 6.7L Power Stroke Fuel Injector Puller With Air-Hammer Powered Punch

    Ford 6.7L Power Stroke Fuel Injector Puller With Air-Hammer Assisted Punch / Slide Hammer Options – PowerPull 200

    Part#: PMXPWP200PROP
    $149.95 - $389.95
    $149.95 - $389.95
    $149.95 - $389.95
    $149.95

    Revolutionize fuel injector removal with the ProMAXX PowerPull Ford 6.7L Power Stroke Fuel Injector Puller Kit. It is the only puller that does not...

    VIEW MORE
    $149.95 - $389.95
    $149.95 - $389.95
    $149.95 - $389.95
    $149.95

SHIPPING INFO

For Saturday delivery or special shipping instructions, please contact ProMAXX Tool M-F 8 a.m. – 5 p.m. EST at 724-941-0941. Expedited Orders Placed by 1pm EST will be Processed Same Day | UPS Ground Processing Time is 1-3 Business Days

WARRANTY INFO

Offering a range of policies

NEED HELP

Contact our support team today
724-941-0941

Promaxx Tool Address

1121 Boyce Road
Suite #2000
Pittsburgh, PA 15241

Any motor company logo on this site is a Registered Trademark. ProMAXX Tool is not affiliated with any of the motor companies on this site.